ENVIROMAC
View
PDF
click here
Portable welding smoke extractor
The ENVIROMAC™ Portable Welding Smoke Extractor is ideal for portable
and fixed welding, dust and oil mist applications.
The unit comes standard with a high efficient washable filter and activated carbon in both doors. You utilize a precoat powder (Envirocoat) to maximize the filtration efficiency and prolong the life expectancy of the filter. The high efficient washable filter can be cleaned with an air hose or a pressure washer. There is also an optional throwaway paper filter.
The unit comes standard with the Snorkvac™ Fume Extractor Snorkel Arm which is 10ft.(3M) long and 6"(160MM) wide. The Snorkvac™ Fume Arm is externally supported to minimize the restriction to the air flow (pressure drop). It also makes arm adjustments or hose replacements much easier than an internally supported arm. The Fume Arm has a handle at the hood plus an additional handle on the first tube. The hood has an air diverter in it to increase the face velocity thus increasing the capture distance. The air diverter also gives you uniform air flow.
The units have 25 ft. of primary cable. The MAC1 runs off a 120 volt, 20 amp service outlet. The MAC2 runs off a 120 volt, 15 amp service outlet. The motors have thermal overload protection on the actualmotor.
There is also a standalone adjustable contactor overload which is located behind the Electrical Control Panel. This maximizes the protection to the motor. The top panel (Electrical Control Panel) of the machine allows easy access to the electrical components.
The units are manufactured out of 14 gauge cold rolled steel and painted with a baked on powder coat. The unit has (2) 4" fixed casters and (2) 4" rotating casters with a brake.
